Regularly I have the issue dat a WinZip PDF will not be printed by my HP Printer.
After all checks and fixes and test page I know that the printer is working fine.
What is the solution or work-around? Is changing from WinZip to Adobe the solution?
Thanks for updating me.
Kind regards,
Printer reports out of paper when it is not
I added an "Admin" password with the HP Utility "Security" area. It will not accept this user name(admin) and password. I am locked out. How is a re-set done?
Please can someone help. all these lights keep flashing when I want to print. Sometimes, there are different numbers showing as well. I just want a simple print but have to press lots of buttons to get it working. Can someone help me on this please?
Display shows E3 continuously.
Nothing in the troubleshooters works so far
Followed them as far as a system reset and now the LCD and the 4 leds just flash continuously
The printer is on but the right side of the on/off light is blinking, and the screen is frozen with the scroll bar not moving.
I have followed all the videos for cleaning and replacing the print heads. Still getting the error message and now carriage is sporadically working and staying to the right. Printer had been working fine. Is this a built in failure?
How can I just START OVER - it is so frustrating because I never know if what I have will print or not.
I just fixed the same problem on my HP Envy Inspire 7900e by updating the payment information in my HP Instant Ink account. The old card had been cancelled and a new one reissued because of a fraud issue. The machine is printing again even as I type this.
Le message que je reçoit est: la tête d'impression semble manquante, n'est pas détecté ou n'est pas correctement installé.
Que faire?
HP office jet 6600
Pierre
My HP 6052 printer has been connected to my Dell laptop for a few years. Recently, the printer became unavailable. Trouble shooter has said "the printer is turned off' but the printer was on as my husband had no problem printing from his laptop here at home. Bluetooth is on and wi-fi is connected. I finally deleted the printer and reconnected. It showed "Connected" but immediately changed to "disconnected". I attempted to connect several more times with the same result. I don't know what else to do. Oh, we have turned off and unplugged the printer and router and that never did the trick.
Anyone have any tips for me?
Hi @Bluenose57,
Welcome to the HP Support Community.
I'd be happy to help you!
To be able to answer you effectively, we need some information.
What device are you using the printer with a Windows computer, Mac, Android, or iPhone?
May I have the exact product name and number? Refer to this document for steps to find the product details. Do not share any of your personal information such as serial, phone number, email ID, etc.
Printer wont budge. Error message is 0x61011beb. How can I resolve this? It seems the printer head is jammed at the right hand end.
Hello, I am writing to see if you can help me or recommend, I was given a HP ENVY 6055e multifunction printer and I was able to install it without any problem, it scans without any problem, but I notice that an orange light flashes on the right side and on the board appears ERROR E0, I print or copy and it does not allow me, I understand that it is the cartridges, I took them out, cleaned their slots and reinstalled them and the same error appears, the cartridges feel more or less full. What could I do in this case?
I used the virtual assistant and it gave me this information
HP ENVY 6055e Multifunction Printer
Out of warranty: Ends Tues. 16, 2023
Product No.
223N1A
Additional Information Coverage Type
of Coverage
Factory Warranty Type
Service Wty: HP HW Support Status
Replacement Date
Start date expired
March 17, 2022
Time
Remaining Warranty Service level expired
Standard
Material Handling
Global Coverage
Standard office hours Standard office days
Standard parts logistics
Standard product lead time
NextLeverage TechResource Remote
HP ships to customer locations
HP Pickup
HP Pickup
Deliverables
Advance Product Exchange
Remote hardware support and diagnostics
Will I have to buy a new printer or can the printer still be fixed?
I hope you can help me, thank you very much
___________________
_
I opened the HP Smart app and noticed something that says the cartridges require registration with HP Insta Ink and I don't understand what to do there.
My designjet T650 cannot seem to handle a print job with multiple pages. It generally gets through the first 3 pages then stops halfway through a page, leaving the remainder of the page blank.
i am printing black and white architectural plans
POST /ipp/printer HTTP.1.1 Content-Length: 179 Content -Type: application/ipp
Hi @RickSCarolina,
Welcome to the HP Support Community.
I'd be happy to help you!
I understand you are having issues with your printer no longer correctly printing envelopes.
If your HP LaserJet Pro MFP M227fdn is not printing envelopes correctly from the bypass tray, you can troubleshoot and adjust settings to resolve this issue. Here’s how you can proceed:
If the issue persists after trying the above steps, it may indicate a hardware problem, Contact HP phone Support for further assistance.
Hope this helps! Keep me posted for further assistance.
Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.
Everytime I print a document the printer prints 2
Hi @Apophis289 !
Thank you for visiting our English HP Support Community.
We advise you to post your question in English to insure a quick response for the Community. This can also help other users to take advantage of your post, in the case they have the same question.
Thank you for your understanding.
Regards,
MayS.
Hello everyone. For as long as I have had this printer, every 5-6 print jobs ends up getting stuck (for lack of a better word). The printer just stops printing right after it starts and does this loading noise where it sounds like it is printing in the same spot over and over until you cancel the print job.
I have restarted it. Reconnected it to the wifi. Unplugged it for a certain amount of time…. It seems like I’ve tried everything. But nothing works.
what can I do to keep this from happening anymore? It is going to start adding up with all of the wasted half printed pages….
