Hi @BobUsmc
Welcome to the HP Support Community!
Thanks for posting your query! We're here to help you get back up and running.
It sounds like your HP LaserJet Pro 200 color MFP M276 is experiencing a WPA authentication issue, preventing consistent printing.
Even though you didn’t change anything, this error can occur due to network updates, router settings, or printer firmware changes. Let’s go through some HP-specific troubleshooting steps to resolve it.
Steps to Fix WPA Authentication Issue on HP LaserJet Pro 200 MFP M276
1. Restore Printer to Default Settings
- On the printer’s control panel, touch the Setup icon.
- Scroll to and select Service Menu.
- Choose Restore Defaults, then confirm by selecting OK.
- The printer will automatically restart.
- After restarting, reconfigure the printer and reconnect it to your wireless network.
2. Reconnect Printer to Wi-Fi
- On the printer’s control panel, go to Wireless Settings.
- Select Wi-Fi Setup Wizard and choose your network.
- Enter your Wi-Fi password carefully.
- If the printer fails to connect, try re-entering the password manually.
3. Update Printer Firmware
- Visit HP’s official firmware update pagehere.
- Download and install the latest firmware for your printer.
- Restart the printer after the update.
4. Check Router Settings
- Log into your router settings and verify that WPA2 encryption is enabled.
- If your router is using WPA3, switch it to WPA2, as older HP printers may not support WPA3.
- Restart your router and printer.
Let me know if you need further assistance! 🚀
If my response helped, please mark it as an Accepted Solution! ✅ It helps others and spreads support. 💙 Also, tapping "Yes" on "Was this reply helpful?" makes a big difference! Thanks! 😊
Take care, and have an amazing day!
Regards,
Hawks_Eye