@Glo1948, Welcome to HP Support Community,
Thank you for posting your query; I’m here to help by guiding you through steps to resolve this issue
When printing a half-fold card using the American Greeting program and encountering an issue where the inside greeting prints upside down, follow these steps to ensure proper orientation:
Preparing to Print
- Fold out the In tray and fold out the In tray extension.
- Slide out the paper length guide.
- Fan the edges of the greeting cards to separate them.
- Align the edges of the cards and place no more than 5 cards in the In tray.
- Push the cards forward until they stop.
- Slide the paper width guide firmly against the edge of the cards.
- Slide the paper length guide firmly against the edge of the cards.
- Lower the Output guide.
Configuring Printer Settings
- Open the Printer Properties dialog box.
- Select the following settings:
- Paper Type: Appropriate paper type
- Paper Size: Appropriate card size
- Under the Features tab, select the following:
- Orientation: Ensure the appropriate orientation is set (either vertical or horizontal based on your printing needs).
- Two-Sided Printing: Check if you want to use this feature.
- Select any other desired print settings and click OK.
I hope this helps.
Please feel free to reply here if you have any questions or if you need further clarification on any of the steps.
Take care and have a good day.
If my response helped, please mark it as an Accepted Solution! ✅ It helps others and spreads support. 💙 Also, tapping "Yes" on "Was this reply helpful?" makes a big difference! Thanks! 😊
Regards,