@Poppop56, Welcome to the HP Support Community!
Thanks for reaching out about your query regarding Error Code OXC4EB8343 on HP Envy 4500!
We're thrilled to have the opportunity to assist you and provide a solution.
If your HP Envy 4500 printer is showing the error code OXC4EB8343, here are steps you can follow to try to resolve the issue:
Turn Off and Unplug:
- Turn off your printer and unplug it from the power source.
- Wait for about 60 seconds.
Check for Obstructions:
- Open the printer cover.
- Check for any paper jams or obstructions within the printer.
- Carefully remove any debris or stuck paper.
Reinitialize the Printer:
- Plug in the printer and turn it back on.
- Open the cartridge access door and ensure the cartridges are properly seated.
Reset Printer:
- Disconnect the power cord from the printer while it’s still powered on.
- Unplug the power cord from the wall outlet.
- Wait for about 60 seconds before reconnecting the power cord to the wall outlet.
- Reconnect the power cord to the printer.
- Turn the printer back on.
Check for Updated Firmware:
- Visit the HP website and check if there are any firmware updates available for your printer.
- If updates are available, follow the instructions to update your printer's firmware.
Hope this helps!
Take care, and have an amazing day!
Did we resolve the issue? If yes, Please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!
Regards,