Press the information button to check the status of the printer.
Make sure the printer is connected wirelessly to the computer.
If you are trying to setup the printer for the first time, refer to this document.
Reset the printer
- With the printer turned on, disconnect the power cord from the rear of the printer.
- Wait at least 60 seconds.
- Reconnect the power cord to the rear of the printer.
- Turn ON the printer, if it does not automatically turn on.
- Wait until the printer is idle and silent before you proceed.
Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.
Try making a standalone copy and check if that works. By this, we can conclude if this is a hardware or a driver issue.
For more info on blinking lights, refer to - Blinking Lights
Hope this helps! Keep me posted.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Have a great day!