Hi
Welcome to the HP Support Community. I'd be happy to assist you.
Your HP printer is designed to reduce power consumption when the printer is not active. Auto Power Off or Schedule On and Off enables the printer to turn off after two hours of inactivity. When you are ready to use your printer again, press the Power button to turn the printer back on.
Open the Setup menu, and then click Preferences. Click Schedule Off, Auto Power Off or Auto-off, depending on your printer model, and then change any settings, if necessary.
Note: For a few model printers, the limit is set to 2 hours.
Update the printer firmware
On the printer screen, go to Setup > Printer maintenance > Update the printer
Click here to know different methods of updating printer firmware.
Reset the printer
- With the printer turned on, disconnect the power cord from the rear of the printer.
- Wait at least 60 seconds.
- Reconnect the power cord to the rear of the printer.
- Turn ON the printer, if it does not automatically turn on.
- Wait until the printer is idle and silent before you proceed.
Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.
Hope this helps! Keep me posted.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Have a great day!