The printer is cycling without anythign being sent to it. I unplugged it from the network to determine that it was not being sent messages inadvertantly. When turned on it initializes, then stops and says it is ready. In a minute or so it turns on and trys to print something- nothing is printed. Both the green and red light turn on and the screen says Hewlett Packard. The light go off and the USB port begins to blink. It blinks for a moment and then all lights go off. Both Green and red light go on for a moment and then jus tthe Green and Ready is displayed. This happens about once a minute. I have to unplug it or turn it off. I have tried to red=boot by unpluging. I ran a diagnotic and it says it is okay. I am now at a loss. Any ideas would be helpful. Thanks in advance.
↧