Welcome to the HP Forums :) I would like to take a moment and thank you for using this forum, it is a great place to find answers. For you to have the best experience on the HP forum, you could also visit our HP Forums Guide for First Time Here? Learn How to Post and More. I see from your post that you are getting an error message on your HP OfficeJet printer. Don't worry I'll do my best to help you with this.
To provide you with an accurate solution, I'll need a few more details:
Have you recently made any changes on the printer before the issue started?
Did it happen after a power surge or power outage?
Have you checked if there is any obstructions inside the printer?
Are you able to move the carriage freely?
Have you tried to reseat the printhead multiple times?
Are you able to make a copy from the printer?
In the meantime, while you respond to this post. Let's try these steps here:
Perform a Hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.
With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
Remove USB cable, if present.
Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.
Turn on the printer and wait till warm-up period finishes and the printer is idle.
Let’s first try and make a “photocopy” to determine whether the issue is with the printer or not. Place a document on the scanner glass and choose “Copy” option. If the printer is making a good copy, then the printer hardware is fine.
Did you try to update the printer firmware? If not, If your printer connected wireless, make sure to temporary connect the device with USB and then follow the link to check for the latest firmware update if available for your printer, using this website.
Restart the printer once done.
For more details on how to update the printer firmware, please go through this link: HP Printers - Updating or Upgrading Printer Firmware
If the issue persists, try the steps listed here: HP Officejet 8600 Printers - 'Ink System Failure' Error
Could you please respond to this post with the details and with the results of the troubleshooting as this will help me in further assisting you.
Eagerly waiting for your response!
that said, If the information I've provided was helpful,
give us some reinforcement by clicking the solution and kudos buttons,
that'll help us and others see that we've got the answers!
Good Luck.