I do not get any error messages. I suspect the issue (which I see others have as well) has something to do with a large mgb picutes causing a problem with very slow print que which times out and just never lets you know what is happening. If I turn off the printer and turn it back on it might print out a partial page and then spit out a few blank pages etc.
I have tried playing with print settings trying to clear the path so that just one set of information is being sent - from the print set up page....etc. I suspect there is something very muddy with the software rules....some conflict between Adobe PHtoshop sending to print to HP. I try sometimes to sent to print directly from my explorer screen to see if that helps, but then I cannot control any of the paper types etc. Sometimes this works and some times it doesn't. I think there must be a way to isolate the print work flow and put all the ram resources of the computer to it exclusively.. there is something buggy that this situation continues; no matter wht the OS or computer