Hi @jimhouck,
Welcome to the HP Support Community!
Thanks for reaching out about your query regarding your printer!
We're thrilled to have the opportunity to assist you and provide a solution.
Try these steps:
Verify Cartridge Compatibility:
- Double-check that the cartridges are the correct model for the HP OfficeJet Pro 8740. Sometimes, similar models might cause confusion.
Check for Protective Coverings:
- Ensure that all protective tape and coverings have been completely removed from the cartridges.
Firmware Update:
- Update your printer’s firmware to the latest version. Sometimes, recent updates may fix compatibility or error issues related to cartridges.
Reset the Printer:
- Soft Reset: Turn off the printer, disconnect the power cord, and wait about 60 seconds before reconnecting and turning it back on.
- Hard Reset: Reset to factory settings through the printer's menu, but note this will clear all current settings.
Inspect and Clean Contacts:
- Carefully remove the cartridges and clean both the cartridges and the interior contacts of the printer with a lint-free cloth slightly dampened with distilled water.
- Make sure everything is dry before reinserting the cartridges.
Power Reset:
- Disconnect the power cord from the back of the printer while the printer is on. Unplug the power cord from the power source. Wait for one minute, then plug it back in.
I hope this helps.
I'm glad I could help! 😊 If this resolved your issue, please mark it as "Accepted Solution" and click "Yes" on "Was this reply helpful?" Your feedback not only keeps us going but also helps others find the solution faster! 👍✨
Take care and have an amazing day ahead! 🚀
Best regards,
