@AttitudeHen, Welcome to HP Support Community,
Thank you for posting your query; I’m here to help by guiding you through steps to resolve this issue
Open Your Printing Software:
- Launch the software application from which you are going to print.
Access the Print Dialog:
- Go to the File menu in your software application and select Print.
- Ensure that your HP printer is selected as the output printer.
Open Printer Properties:
- Click the button to open the Properties dialog box. This could be labeled as Properties, Options, Printer Setup, Printer, or Preferences, depending on the application.
Navigate to Features Tab:
- In the printer properties menu, go to the Features tab.
Set Paper Type for Transfer Paper:
- Within the Paper Type drop-down menu, select HP Iron-on Transfer.
Reverse the Image (Mirror Image Setting):
- Go to the Advanced tab in the properties.
- Under Printer Features, find and enable the Mirror Image setting.
Confirm and Print:
- Click OK to confirm your settings in the properties dialog box.
- Finally, click Print or OK in the print dialog to start printing.
I hope this helps.
Please feel free to reply here if you have any questions or if you need further clarification on any of the steps.
Take care and have a good day.
If my response helped, please mark it as an Accepted Solution! ✅ It helps others and spreads support. 💙 Also, tapping "Yes" on "Was this reply helpful?" makes a big difference! Thanks! 😊
Regards,