@DavidB5678, Welcome to HP Support Community,
Thank you for posting your query; I’m here to help by guiding you through steps to resolve this issue
If the ink warning symbols and the flashing warning light (!) continue to display on your HP Smart Tank 750 printer even after refilling the ink reservoirs, here are a few steps you can follow to address the issue:
Refill Ink Tanks Properly:
- Ensure that the ink tanks are filled correctly with the appropriate ink levels. Check that the ink reservoir caps are securely closed to prevent any ink leakage.
Check Ink Level Indicators:
- Pay attention to the ink level indicators on the printer's control panel to ensure they reflect the current ink status accurately.
Restart the Printer:
- Turn off the printer and unplug it from the power source. Wait for about 60 seconds, then plug it back in and turn it on again. This can help reset the printer’s memory and resolve any errors.
Perform a Hard Reset:
- If the warnings persist, perform a hard reset of the printer. With the printer turned on, disconnect the power cord from the printer, unplug it from the power source, wait for a minute, then reconnect and turn the printer back on.
Check for Printhead Issues:
- Inspect the printhead for any issues. Clean it if necessary, as sometimes printhead errors can trigger warning lights.
Consult HP Support:
- If these steps do not resolve the issue, refer to the HP Customer Support for further assistance. They can provide more detailed troubleshooting based on your specific situation.
References:
I hope this helps.
Please feel free to reply here if you have any questions or if you need further clarification on any of the steps.
Take care and have a good day.
If my response helped, please mark it as an Accepted Solution! ✅ It helps others and spreads support. 💙 Also, tapping "Yes" on "Was this reply helpful?" makes a big difference! Thanks! 😊
Regards,