Re: Error lights blinking cannot print

@Nhgbgf4_, Welcome to the HP Support Community!  

Thanks for reaching out about your query regarding your HP LaserJet M110w Blinking Error Lights! 

We're thrilled to have the opportunity to assist you and provide a solution.  

If your HP LaserJet M110w printer's orange exclamation mark and the green power button are blinking, it indicates the printer is in a fatal error state. Here are steps to resolve the issue:

Reset the Printer

1. Turn off the printer: Press the power button to turn off the printer. If the printer does not turn off, disconnect the power cord from the printer.
2. Unplug the power cord: Unplug the power cord from the power source.
3. Wait for 60 seconds: Wait at least 60 seconds.
4. Reconnect the power cord: Plug the power cord directly into a wall outlet and reconnect it to the printer.
5. Turn on the printer: Press the power button to turn on the printer to complete the reset.

Plug the Printer Directly into a Wall Outlet

1. Turn off the printer: If using a surge protector, extension cable, or power strip, plug the printer directly into a wall outlet.
2. Unplug the power cord from the surge protector: Ensure no intermediaries between the wall outlet and the printer.
3. Plug the power cord directly into an electrical outlet.
4. Turn on the printer: Press the power button.

If the issue persists, performing these steps might resolve a common fatal error state.  

Take care, and have an amazing day!  

Did we resolve the issue? If yes, Please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!  

Regards,