This worked on the 6458e
Envy 6458e
1. a. Open the ink cartridge access door. 2. b. Press and hold the Wireless button for 3 seconds. 3. c. Close the access door. A Load Paper message displays on the control panel, and the printer begins initializing. 4. d. If the initialization does not begin, repeat steps a through c until initialization begins. 5. e. Follow the prompts on the control panel to complete initialization. |
le me know if the 6432 worked or not
If you get past the setup cartridge then this is how to connect:
Watch the reset video or perform the steps. After resetting, you generally have 2 hours to complete the setup. Decide if you want to connect the printer to the router or to print directly to the printer and bypass the router.
Many HP and other OEM printers have problems with the router when the router has two bands and both bands have the same name (SSID). Log into the modem and rename one of the bands. Alternately, contact your ISP and have them rename a band.
Or simply use Wi-Fi direct (but read note below about Instant Ink).
Do not call any phone numbers shown in any of the videos or revealed by a Bing or Google search unless it is an HP site or video.
You may need to reset the printer: Click here
Wi-Fi setup to router: video here
For Wi-Fi direct setup click here.
This is useful if you do not have access to the router or you want to bypass the router and print directly to the printer.
Simple push button or WPS setup is described on page 28 of User Manual
Full feature software 6432e April 2024
InkJet Reference 6432
Let me know if a problem