@Fede23, Welcome to the HP Support Community!
Thanks for reaching out about your query regarding flashing printer lights!
We're thrilled to have the opportunity to assist you and provide a solution.
It sounds like your HP DeskJet 2700 printer is experiencing a hardware error or a paper-related issue. Here are some steps to troubleshoot and fix the problem:
1. Check for Error Codes:
- If all lights are flashing, your printer might be in an error state. Try pressing the Resume (⚠️) button to see if the error clears.
2. Inspect Paper and Ink Levels:
- Make sure there are no paper jams.
- Check if the ink cartridges are properly installed and have enough ink.
3. Reset the Printer:
- Turn off the printer.
- Unplug it from the power source.
- Wait 60 seconds.
- Plug it back in and turn it on.
4. Update or Reinstall Drivers:
- If the problem persists, update the printer drivers from HP’s official website.
5. Check for Overheating:
- If printing stops mid-way and lights flash, the printer might be overheating. Let it rest for a few minutes before printing again.
6. Run HP Print and Scan Doctor (Windows users):
- Download and run HP Print and Scan Doctor from HP’s support page to diagnose and fix software-related issues.
If the issue continues after these steps, let me know what the error lights are indicating (pattern, number of flashes, etc.), and I can assist further!
Take care, and have an amazing day!
Did we resolve the issue? If yes, Please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!
Regards,