Re: My second page is upside down to my first page. How do I fix it?

Hi @Sonnybubba 

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

It sounds like you're experiencing an issue where your printer is rotating the second page upside down when printing on both sides (duplex printing). This can happen due to a setting in your print configuration. Here’s how you can fix it:

1. Check Printer Settings for Duplex Printing

Most printers have an option to control how double-sided printing is done (flip on the long edge or flip on the short edge). If this is set incorrectly, it could cause the pages to print in the wrong orientation.

Steps to check and change duplex printing settings:

1. Open the Print Dialog: Go to the document you want to print and click on File> Print.
2. Select your printer from the list.
3. Click on Printer Properties or Preferences (this can vary depending on the printer).
4. Look for the Duplex Printing or Two-Sided Printing option.
5. Make sure the setting is set to Flip on Long Edge (this is the most common option for printing two-sided pages in the correct orientation).
   • If it's set to Flip on Short Edge, it will cause the pages to be printed upside down on the second side.

2. Change Settings in the Printer’s Control Panel (if applicable)

If you have a printer with a control panel (physical buttons or touchscreen), you may be able to adjust duplex settings directly from there.

1. Navigate to Printer Settings: On your printer’s screen, go to the Settings or Preferences section.
2. Look for an option related to Duplex Printing or Double-Sided Printing.
3. Change it to Flip on Long Edge.

3. Check the Application's Print Settings

Some applications (like Microsoft Word or Adobe Acrobat) have their own print settings that can override system defaults. Make sure the settings for duplex printing in the specific application you’re using also match your desired configuration.

For example, in Microsoft Word:

1. Go to File> Print.
2. Click on the Printer Properties button.
3. Make sure duplex printing is enabled and set to Flip on Long Edge.

4. Check the Document Layout

In some cases, the document itself might have formatting that’s causing the issue. If the document has a custom page layout or orientation settings, it could be affecting how it prints.

• Ensure that your document’s page orientation (portrait or landscape) is consistent throughout.

I hope this helps.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.