We installed a new 4301 on Tuesday around 11am. Wednesday morning at approximately 2:45am the firmware was updated. Ever since then we've been getting tons of entries in the Event Log and we cannot print, cancel jobs or anything. We've rebooted the machine and short of restoring to factory I'm not sure what to do. Below is a list of some of the errors and what I can tell they're firmware related.
F0.01.04.04 |
01.01.32.01 |
01.01.32.01 |
F0.03.05.05 |
F0.01.04.04 |
F0.03.24.02 |
F0.03.04.08 |
F0.03.05.05 |
F0.01.63.01 |
F0.01.04.01 |
F0.01.45.01 |
F0.03.1F.05 |
F0.03.05.05 |
F0.03.25.01 |
F0.03.06.02 |
F0.03.05.05 |
F0.03.05.03 |
F0.03.05.07 |
F0.03.1F.0B |
F0.03.1B.02 |
F0.03.1B.10 |
F0.01.D5.00 |
F0.01.0C.02 |
F0.01.D5.00 |
F0.03.04.09 |
F0.01.04.06 |
F0.01.D5.01 |
F0.01.04.0D |
F0.01.04.02 |
F0.01.04.08 |
F0.03.05.06 |
F0.01.04.09 |
F0.02.0B.0D |
F0.01.D5.01 |
F0.03.15.07 |
F0.03.05.05 |
F0.01.04.04 |
F0.03.24.02 |
F0.03.04.08 |
F0.01.04.01 |
F0.01.45.01 |
F0.03.05.05 |
F0.03.25.01 |
F0.03.1F.0B |
F0.01.04.0D |
F0.01.04.0C |
Any help is appreciated!!