Hi,
This is my first post, having recently joined the forum, so apologies if this has been answered before.
I have just tried the double-sided print option on my Designjet L26500 and have dismally failed!
I printed the first side ok, including the black second side registration bar but when I came to do the second side, I first had a real issue getting the press to locate the bar, to the point that I actually gave up and just tried to print the second side to 'see what happened', after manually placing the bar.
The rip seemed to have automatically created a file for the second side so I ran that but, although the printer was running and moving as it should, no print was actually being applied to the material!
I have checked that I followed all instructions in the manual so cannot understand,
1/ Why the press could not locate the reg bar.
2/ Why the second side did not print to the maqterial at all.
Any advice or pointers would be very much appreciated ...... confused.com