@rkrstar6025, Welcome to HP Support Community.
Thank you for posting your query, I will be glad to help you.
The blinking blue light on your HP Envy 6110e printer's Wi-Fi button usually indicates a wireless connection issue. Here are the common reasons and solutions:
🔹Possible Causes & Fixes:
1️⃣Printer is Not Connected to Wi-Fi
- The blinking means your printer isn't connected to your Wi-Fi network.
- Try reconnecting:
- Press and hold the Wireless button (📶) on the printer for 5 seconds until it starts blinking faster.
- On your phone or PC, open the HP Smart app and follow the Wi-Fi setup instructions.
2️⃣Router or Network Issues
- Restart your Wi-Fi router by turning it off for 10 seconds, then turn it back on.
- Move the printer closer to the router to improve signal strength.
3️⃣Wi-Fi Direct is On Instead of Normal Wi-Fi
- If your printer is in Wi-Fi Direct mode, it won’t connect normally.
- Press the Wi-Fi Direct button (📶) on the printer until the light turns off.
- Try reconnecting using HP Smart.
4️⃣Printer Needs a Restart
- Power off the printer, unplug it for 60 seconds, then plug it back in and restart.
5️⃣Factory Reset (Last Resort)
- If nothing works, reset the printer:
- Press and hold the Wi-Fi and Cancel (X) buttons together for 10 seconds until the printer restarts.
I hope this helps.
Take care and have a good day.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!
Max3Aj
HP Support
