Re: Prints one page, then stops

Hi Senseibleone,

I understand your Photosmart C510a is not fully printing a multi-page document. I have looked into this issue for you and I am going to suggest a few things.

First, lets determine if the issue is a hardware or software problem.

Make a few blank copies, to see if the same issue happens when you copy. If the printer stops like it does when you print several pages, the issue is a hardware problem. If not, proceed with testing for a software problem.

Try printing a multi-page document by using another program on your computer. If the print job prints all successfully through another program, the issue could be within the program you used in the beginning.

You did not specify if you were running a Windows or Mac OS, however, if you are using a Windows OS, run this Print and Scan Doctor, which is a diagnostic tool that detects printing and scanning issues and usually corrects them.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03275041


If you believe the problem to be with the printer, you can also try cleaning the rollers. Click this link and follow "Solution four".
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02232283

I hope this helps you, feel free to respond with any further questions.

Good luck